Complete Subaru Outback Legacy Impreza LED Interior Upgrade – 2-Piece Kit
Upgrade your Subaru Outback Legacy Impreza with our 2-piece LED interior light kit. Replace every dim factory incandescent bulb with bright 6000K pure white LEDs for a modern, premium cabin experience. Installation takes just 15 minutes with no special tools required.
What LED Bulbs Fit the Subaru Outback Legacy Impreza?
This 2-piece kit contains bulbs that match every interior socket type in your Subaru Outback Legacy Impreza: T10 wedge bulbs for map lights, door lights, footwells, and license plate lights; festoon bulbs for dome lights. Each bulb is polarity-protected and pre-tested. Simply remove the old bulb and push in the LED — no adapters, wiring, or modifications needed. The ultra-slim design fits behind tight lenses with no clearance issues.
How Many Interior Bulbs Does the Subaru Outback Legacy Impreza Have?
Your Subaru Outback Legacy Impreza uses 2 bulbs for a full interior LED upgrade. This includes overhead dome lights, reading/map lights, door courtesy lights, footwell illumination, trunk/cargo area lighting, and where equipped, vanity mirror lights and glove box lights. The kit provides exact replacements for every position with a few spares included.
Does the Subaru Outback Legacy Impreza Need CANbus LEDs?
The Subaru Outback Legacy Impreza does not require CANbus-specific LEDs for interior lights, but our kit is fully compatible and flicker-free.
Stock vs LED: What Changes?
| Feature | Stock Bulb | AutoKitShop LED |
|---|---|---|
| Brightness | ~40-50 lumens | ~200 lumens (4-5x brighter) |
| Color | 3000K yellow | 6000K pure white |
| Power | ~5W each | ~1.5W each (70% less) |
| Lifespan | ~1,000 hours | 30,000+ hours (30x longer) |
| Heat | 50-70°C | ~30°C (safe for plastic trim) |
How to Install LEDs in Your Subaru Outback Legacy Impreza
- Use a plastic trim tool to gently pry off the dome light lens
- Remove the old incandescent bulb from its socket
- Insert the new LED bulb into the socket (fits T10 and festoon positions)
- If the LED doesn't light, flip it 180° and reinsert — LEDs are polarity-sensitive
- Test before reassembling each light fixture
- Repeat for all 2 positions — total time about 15-20 minutes
Buy the Subaru Outback Legacy Impreza LED Interior Light Kit
Shop the 2-Piece LED Interior Light Kit for Subaru Outback Legacy Impreza at AutoKitShop.com →
0 comments