Complete Toyota Allion Premio T24 T26 240 260 T240 T260 (T24, T26, T240, T260) LED Interior Upgrade – 10-Piece Kit
Upgrade your Toyota Allion Premio T24 T26 240 260 T240 T260 with our 10-piece LED interior light kit. Replace every dim factory incandescent bulb with bright 6000K pure white LEDs for a modern, premium cabin experience. Installation takes just 15 minutes with no special tools required.
What LED Bulbs Fit the Toyota Allion Premio T24 T26 240 260 T240 T260?
This 10-piece kit contains bulbs that match every interior socket type in your Toyota Allion Premio T24 T26 240 260 T240 T260: T10 wedge bulbs for map lights, door lights, footwells, and license plate lights; festoon bulbs for dome lights. Each bulb is polarity-protected and pre-tested. Simply remove the old bulb and push in the LED — no adapters, wiring, or modifications needed. The ultra-slim design fits behind tight lenses with no clearance issues.
How Many Interior Bulbs Does the Toyota Allion Premio T24 T26 240 260 T240 T260 Have?
Your Toyota Allion Premio T24 T26 240 260 T240 T260 uses 10 bulbs for a full interior LED upgrade. This includes overhead dome lights, reading/map lights, door courtesy lights, footwell illumination, trunk/cargo area lighting, and where equipped, vanity mirror lights and glove box lights. The kit provides exact replacements for every position with a few spares included.
Does the Toyota Allion Premio T24 T26 240 260 T240 T260 Need CANbus LEDs?
The Toyota Allion Premio T24 T26 240 260 T240 T260 (T24, T26, T240, T260) uses a CANbus system. Our LEDs include built-in load resistors for error-free operation without warning lights or flickering.
Stock vs LED: What Changes?
| Feature | Stock Bulb | AutoKitShop LED |
|---|---|---|
| Brightness | ~40-50 lumens | ~200 lumens (4-5x brighter) |
| Color | 3000K yellow | 6000K pure white |
| Power | ~5W each | ~1.5W each (70% less) |
| Lifespan | ~1,000 hours | 30,000+ hours (30x longer) |
| Heat | 50-70°C | ~30°C (safe for plastic trim) |
How to Install LEDs in Your Toyota Allion Premio T24 T26 240 260 T240 T260
- Use a plastic trim tool to gently pry off the dome light lens
- Remove the old incandescent bulb from its socket
- Insert the new LED bulb into the socket (fits T10 and festoon positions)
- If the LED doesn't light, flip it 180° and reinsert — LEDs are polarity-sensitive
- Test before reassembling each light fixture
- Repeat for all 10 positions — total time about 15-20 minutes
0 comments