What Is a Mito 955 2008-2015 Interior LED Light Kit?
A Mito 955 2008-2015 interior LED light kit is a set of direct-replacement bulbs that swap into the factory dome, map, reading, vanity, trunk, glove-box and footwell sockets without cutting or rewiring. (chassis codes P21W, T10) AutoKitShop lists 35 Mito 955 2008-2015 LED kits covering model years 1998 to 2023. Kits for this model run from 2-piece to 10-piece sets. Each bulb is rated at 300 lumens and roughly 3x the brightness of the original incandescent lamp, at a fraction of the current draw, with a 50,000-hour service life. Kits are supplied as complete sets with the correct socket adapters, so nothing needs to be ordered separately. If a bulb does not light on first fit, rotate it 180 degrees, because LEDs are polarity sensitive. Colour options are white (6000K), ice blue, warm white (3000K) and purple.
What Is Included in the Mito 955 2008-2015 LED Kit?
Upgrade your Alfa Romeo Mito 955 2008-2015 with this 10-piece LED kit. Replace every dim factory bulb with bright 6000K LEDs for a modern, premium cabin experience. Installation takes 15 minutes with no special tools.
What LED Bulbs Fit the Alfa Romeo Mito 955 2008-2015?
This 10-piece kit contains bulbs that match every interior socket type in your Alfa Romeo Mito 955 2008-2015: T10 wedge for map lights, door lights, footwells, and license plate lights; festoon bulbs for dome lights. Each bulb is polarity-protected and pre-tested before shipping. Simply remove the old bulb and push in the LED — no adapters, wiring, or modifications needed.
How Many Interior Bulbs Does the Alfa Romeo Mito 955 2008-2015 Have?
Your Alfa Romeo Mito 955 2008-2015 uses 10 bulbs for a complete interior LED upgrade. This includes overhead dome lights, reading/map lights, door courtesy lights, footwell illumination, trunk/cargo area, and where equipped, vanity mirror and glove box lights. The kit provides exact replacements for every position with a few spares.
Does the Alfa Romeo Mito 955 2008-2015 Need CANbus LEDs?
The Alfa Romeo Mito 955 2008-2015 uses a CANbus system. Our LEDs include built-in load resistors for error-free operation.
Stock vs LED: What Changes in the Alfa Romeo Mito 955 2008-2015?
| Feature | Stock Bulb | AutoKitShop LED |
|---|---|---|
| Brightness | ~40-50 lumens | ~200 lumens (4-5x brighter) |
| Color | 3000K yellow | 6000K pure white |
| Power | ~5W each | ~1.5W each (70% less) |
| Lifespan | ~1,000 hours | 30,000+ hours (30x longer) |
| Heat | 50-70°C | ~30°C (safe for plastic trim) |
How Do You Install LED Interior Lights in a Mito 955 2008-2015?
- Pry the dome light lens off gently with a plastic trim tool
- Remove the old incandescent bulb
- Insert the new LED bulb into the socket
- If it doesn't light, flip it 180° (LEDs are polarity-sensitive)
- Repeat for all positions — about 15-20 minutes total
What Is Included in the Mito 955 2008-2015 LED Kit?
Shop the 10-Piece LED Kit for Alfa Romeo Mito 955 2008-2015 at AutoKitShop →
Where Can You Buy Mito 955 2008-2015 Interior LED Lights?
Browse the full Alfa Romeo interior LED lights collection for 35 model-specific kits, or start with one of these:
0 comments