Is the 13-piece LED kit compatible with the Dodge Challenger (2008-2016)?

Yes, this 13-piece LED interior light kit uses T10 wedge and festoon sockets that match every interior position in the Dodge Challenger (2008-2016). Direct plug-and-play replacement — no cutting, no wiring, no adapters needed.

Does the Dodge Challenger (2008-2016) need CANbus LED bulbs?

Yes, the Dodge Challenger uses CANbus monitoring and needs LEDs with built-in load resistors to prevent dashboard warning lights.

Dodge Challenger 2008-2016 LED Interior Light Upgrade – 13-Piece Kit

Q: How many interior bulbs does the Dodge Challenger (2008-2016) need?

The Dodge Challenger (2008-2016) uses 13 bulbs for a complete interior LED upgrade: overhead dome lights, map/reading lights, door courtesy lights, footwell illumination, trunk/cargo area, and where equipped, vanity mirror and glove box lights. This kit includes exact replacements for every position.

What Is a Challenger 2008-2016 Interior LED Light Kit?

A Challenger 2008-2016 interior LED light kit is a set of direct-replacement bulbs that swap into the factory dome, map, reading, vanity, trunk, glove-box and footwell sockets without cutting or rewiring. AutoKitShop lists 11 Challenger 2008-2016 LED kits covering model years 2008 to 2017. Kits for this model run from 13-piece to 13-piece sets. Each bulb is rated at 300 lumens and roughly 3x the brightness of the original incandescent lamp, at a fraction of the current draw, with a 50,000-hour service life. Kits are supplied as complete sets with the correct socket adapters, so nothing needs to be ordered separately. If a bulb does not light on first fit, rotate it 180 degrees, because LEDs are polarity sensitive. Colour options are white (6000K), ice blue, warm white (3000K) and purple.

What Is Included in the Challenger 2008-2016 LED Kit?

Upgrade your Dodge Challenger (2008-2016) with our 13-piece LED interior light kit. Replace every dim factory incandescent bulb with bright 6000K pure white LEDs for a modern, premium cabin experience. Installation takes just 15 minutes with no special tools required.

What LED Bulbs Fit the Dodge Challenger (2008-2016)?

This 13-piece kit contains bulbs that match every interior socket type in your Dodge Challenger (2008-2016): T10 wedge bulbs for map lights, door lights, footwells, and license plate lights; festoon bulbs for dome lights. Each bulb is polarity-protected and pre-tested. Simply remove the old bulb and push in the LED — no adapters, wiring, or modifications needed. The ultra-slim design fits behind tight lenses with no clearance issues.

How Many Interior Bulbs Does the Dodge Challenger Have?

Your Dodge Challenger (2008-2016) uses 13 bulbs for a full interior LED upgrade. This includes overhead dome lights, reading/map lights, door courtesy lights, footwell illumination, trunk/cargo area lighting, and where equipped, vanity mirror lights and glove box lights. The kit provides exact replacements for every position with a few spares included.

Does the Dodge Challenger Need CANbus LEDs?

The Dodge Challenger 2008-2016 uses a CANbus system. Our LEDs include built-in load resistors for error-free operation without warning lights or flickering.

Stock vs LED: What Changes?

Feature	Stock Bulb	AutoKitShop LED
Brightness	~40-50 lumens	~200 lumens (4-5x brighter)
Color	3000K yellow	6000K pure white
Power	~5W each	~1.5W each (70% less)
Lifespan	~1,000 hours	30,000+ hours (30x longer)
Heat	50-70°C	~30°C (safe for plastic trim)

How Do You Install LED Interior Lights in a Challenger 2008-2016?

Use a plastic trim tool to gently pry off the dome light lens
Remove the old incandescent bulb from its socket
Insert the new LED bulb into the socket (fits T10 and festoon positions)
If the LED doesn't light, flip it 180° and reinsert — LEDs are polarity-sensitive
Test before reassembling each light fixture
Repeat for all 13 positions — total time about 15-20 minutes