What LED bulbs fit a Veloster?

A Veloster uses T10 wedge bulbs (W5W/194/168) for the map, door, footwell and license plate lights, and festoon bulbs for the dome and trunk. AutoKitShop stocks 10 Veloster kits covering the full model run, each supplied with the correct adapters so no separate bulbs are needed.

Does a Veloster need CANbus error-free LEDs?

Most Veloster vehicles built after 2005 monitor the interior lighting circuit and will show a bulb-failure warning with a plain LED. A CANbus error-free kit includes the resistor or decoder that mimics the original load, so the warning stays off. Older vehicles with a simple on/off circuit run fine on standard LEDs.

How long does it take to install Veloster interior LED lights?

Allow 15 to 30 minutes. Switch the light off, pry the lens off with a plastic trim tool, pull the old bulb, push in the LED and test it before refitting the lens. If a bulb does not light, rotate it 180 degrees — LEDs are polarity sensitive. No wiring, coding or tools beyond a trim tool are required.

Will Veloster interior LEDs cause flickering?

Not with an error-free kit. Flickering on a Veloster is normally caused by the body control module pulsing the circuit to test for a failed bulb. The built-in load resistor in an error-free kit absorbs that pulse. If you already own a non-CANbus kit, adding a decoder resolves it.

What colour temperature is best for a Veloster?

White (6000K) matches the factory LED signature on late-model Veloster cars and looks the most OEM. Warm white (3000K) suits older cabins with filament-era trim. Ice blue and purple are aesthetic choices. Colour is selected per bulb, so you can keep the dome white and tint the footwells.

Hyundai Veloster Interior LED Swap: ZITWO 11-Piece Kit for 2011-2017

June 21, 2026

What Is a Veloster Interior LED Light Kit?

A Veloster interior LED light kit is a set of direct-replacement bulbs that swap into the factory dome, map, reading, vanity, trunk, glove-box and footwell sockets without cutting or rewiring. (chassis codes HB20, I30, H11) AutoKitShop lists 10 Veloster LED kits covering model years the model run. Kits for this model run from 11-piece to 11-piece sets. Each bulb is rated at 300 lumens and roughly 3x the brightness of the original incandescent lamp, at a fraction of the current draw, with a 50,000-hour service life. Kits are supplied as complete sets with the correct socket adapters, so nothing needs to be ordered separately. If a bulb does not light on first fit, rotate it 180 degrees, because LEDs are polarity sensitive. Colour options are white (6000K), ice blue, warm white (3000K) and purple.

What Should You Know About Your Veloster's Interior is the Weakest?

The Hyundai Veloster is one of the quirkiest cars on the road ??three doors, sporty looks, and a genuinely fun driving experience. But the interior lighting? It's pure 2011 Hyundai parts-bin special. Dim, yellowed incandescent bulbs that make the cabin feel dated the second the sun goes down. Veloster owners on forums have been modding these lights for years, and it's the easiest way to modernize the interior without spending real money.

What Is Included in the Veloster LED Kit?

The ZITWO 11Pcs LED Bulb Interior Kit for Hyundai Veloster 2011-2017 is a complete interior swap. Here's what's included:

Front Dome & Map Light ??2 pcs
Rear Dome & Map Light ??1 pc
Vanity Mirror Light ??2 pcs
Trunk Light ??1 pc
Glove Box Light ??1 pc
License Plate Light ??2 pcs
Extra Light ??2 pcs (spares)
Free Installation Tools ??1 pc

All bulbs use the T10 (W5W/194) wedge base. Each delivers 300 lumens at 8 watts ??roughly triple the factory output. The 31mm package fits perfectly.

What Should You Know About Why Veloster Owners Love This Mod?

The Veloster's cabin is relatively small, which means better lighting makes a huge difference. The front dome/map lights become genuinely useful for reading or finding dropped items. The rear hatch light transforms the cargo area ??the Veloster's hatch is surprisingly practical but impossible to see in at night with the stock bulb. And the license plate lights give the rear end a cleaner, more modern appearance. Threads on Veloster forums consistently recommend LED swaps as the first interior mod.

How Do You Install LED Interior Lights in a Veloster?

Hyundai makes these easy. Pry off the light covers with the included trim tool, pull the old bulb, push in the LED. If it doesn't light, flip it 180 degrees ??LEDs are polarity-sensitive. The Veloster's dome lights have straightforward contacts. Total time: about 15 minutes for the whole car.

Will LED Bulbs Trigger a Warning Light on a Veloster?

Hyundai's CANbus system is sensitive. The ZITWO kit includes built-in error cancellation for zero flicker and zero dashboard warnings. No hyper-flash, no bulb-out messages. Just clean, stable light across all positions. 100% error-free on the Veloster.

Which Colour Temperature Should You Choose?

Available in White, Ice Blue, Warm White, or Purple. White (6000K) gives the cleanest modern look. Warm White keeps a halogen feel. All backed by a 2-year warranty with 50,000+ hour lifespan.

What Should You Know About OEM vs LED Comparison?

Feature	OEM Incandescent	ZITWO LED Kit
Brightness	~80 lumens	300 lumens per bulb
Power Draw	~10W per bulb	8W per bulb
Lifespan	1,000-2,000 hours	50,000+ hours
Color Options	Warm yellow	Choice of 4 colors
CANbus Safe	N/A (OEM)	100% error-free
Installation	Replace when dead	Plug and play, 15 min
Warranty	OEM 1-year	2 years

What Should You Know About Modernize Your Veloster's Interior?

Your Veloster deserves better than dim yellow bulbs. Grab the ZITWO 11Pcs LED Kit for Hyundai Veloster at AutoKitShop and transform your cabin in 15 minutes.

Browse LED interior light kits at AutoKitShop