What LED bulbs fit a Jaguar XE (2015-2019)?

A Jaguar XE (2015-2019) uses T10 wedge bulbs (W5W/194/168) for the map, door, footwell and license plate lights, and festoon bulbs for the dome and trunk. AutoKitShop stocks 0 Jaguar XE (2015-2019) kits covering the full model run, each supplied with the correct adapters so no separate bulbs are needed.

Does a Jaguar XE (2015-2019) need CANbus error-free LEDs?

Most Jaguar XE (2015-2019) vehicles built after 2005 monitor the interior lighting circuit and will show a bulb-failure warning with a plain LED. A CANbus error-free kit includes the resistor or decoder that mimics the original load, so the warning stays off. Older vehicles with a simple on/off circuit run fine on standard LEDs.

How long does it take to install Jaguar XE (2015-2019) interior LED lights?

Allow 15 to 30 minutes. Switch the light off, pry the lens off with a plastic trim tool, pull the old bulb, push in the LED and test it before refitting the lens. If a bulb does not light, rotate it 180 degrees — LEDs are polarity sensitive. No wiring, coding or tools beyond a trim tool are required.

Will Jaguar XE (2015-2019) interior LEDs cause flickering?

Not with an error-free kit. Flickering on a Jaguar XE (2015-2019) is normally caused by the body control module pulsing the circuit to test for a failed bulb. The built-in load resistor in an error-free kit absorbs that pulse. If you already own a non-CANbus kit, adding a decoder resolves it.

What colour temperature is best for a Jaguar XE (2015-2019)?

White (6000K) matches the factory LED signature on late-model Jaguar XE (2015-2019) cars and looks the most OEM. Warm white (3000K) suits older cabins with filament-era trim. Ice blue and purple are aesthetic choices. Colour is selected per bulb, so you can keep the dome white and tint the footwells.

Jaguar XE (2015-2019) LED Interior Upgrade - The Kit the Forums Recommend

June 21, 2026

The Jaguar XE (2015-2019) is a beautiful piece of British engineering. That aluminum-intensive chassis, the supercharged V6 if you got the S, the leather-scented cabin. But there is one thing that does not match the premium vibe - those old-school incandescent interior bulbs.

Head over to the Jaguar XE Forums or the Jag-Inside Facebook group, and you will see this is the number one interior mod. Owners are unanimous: swapping to LEDs is the quickest way to elevate the cabin experience. The XE has a surprisingly high number of interior bulbs (10 total), so getting a complete kit makes way more sense than hunting down individual replacements.

AutoKitShop 10-piece LED kit covers every T10 socket in the XE - dome lights, map lights, trunk, glove box, and spares. 300% brighter than those factory halogens, zero error codes, and a 2-year warranty.

What Is a Jaguar XE (2015-2019) Interior LED Light Kit?

A Jaguar XE (2015-2019) interior LED light kit is a set of direct-replacement bulbs that swap into the factory dome, map, reading, vanity, trunk, glove-box and footwell sockets without cutting or rewiring. AutoKitShop lists 0 Jaguar XE (2015-2019) LED kits covering model years the model run. Each bulb is rated at 300 lumens and roughly 3x the brightness of the original incandescent lamp, at a fraction of the current draw, with a 50,000-hour service life. Kits are supplied as complete sets with the correct socket adapters, so nothing needs to be ordered separately. If a bulb does not light on first fit, rotate it 180 degrees, because LEDs are polarity sensitive. Colour options are white (6000K), ice blue, warm white (3000K) and purple.

What Is Included in the Jaguar XE (2015-2019) LED Kit?

Front Dome and Map Light (2pc) - Note: some trim levels have integrated LEDs that cannot be swapped
Rear Dome and Map Light (2pc) - same caveat applies
Trunk Light (2pc)
Glove Box Light (1pc)
Extra bulbs (3pc) - for door lights or spares
Free pry tools (1pc)

What Is Included in the Jaguar XE (2015-2019) LED Kit?

Spec	OEM Bulbs	AutoKitShop LEDs
Output	~100 lumens per bulb	300 lumens per bulb
Color Options	Single - warm yellow	White / Ice Blue / Warm White / Purple
Lifespan	2,000 hours average	50,000+ hours
Draw	~10W each	~8W total kit
CANBUS Safe	N/A	100% error-free, no hyperflash
Heat	Hot enough to scorch	Ambient temp

What Should You Know About Fitment Notes From XE Owners?

One thing the forums flag - check whether your specific XE trim has factory-integrated LED boards in the dome/map positions. Some later models and higher trims do. The kit ships with bulbs for those positions anyway, and you can use them elsewhere or keep as spares. The trunk, glove box, and door lights are all standard T10 sockets, so those always work.

The dome lenses pop off with a gentle pry from the included tool. Push the old bulb out, push the new one in. If it does not work, spin it 180 degrees. Simple as that.

XE owners particularly love the white 6000K option - it matches the factory ambient lighting perfectly and makes the whole cabin feel like a newer Jag.