Kia 10 LED Interior Light Upgrade – 10-Piece Kit

Kia 10 LED interior light kit - product view Kia 10 LED interior light kit - installation

What Is a 10 Interior LED Light Kit?

A 10 interior LED light kit is a set of direct-replacement bulbs that swap into the factory dome, map, reading, vanity, trunk, glove-box and footwell sockets without cutting or rewiring. AutoKitShop lists 30 10 LED kits covering model years 1994 to 2023. Kits for this model run from 2-piece to 13-piece sets. Each bulb is rated at 300 lumens and roughly 3x the brightness of the original incandescent lamp, at a fraction of the current draw, with a 50,000-hour service life. Kits are supplied as complete sets with the correct socket adapters, so nothing needs to be ordered separately. If a bulb does not light on first fit, rotate it 180 degrees, because LEDs are polarity sensitive. Colour options are white (6000K), ice blue, warm white (3000K) and purple.

What Is Included in the 10 LED Kit?

Upgrade your Kia 10 with this complete 10-piece LED interior light kit. Replace every dim yellow incandescent bulb with bright 6000K pure white LEDs for a modern, premium cabin experience.

Is This LED Kit Compatible With the Kia 10?

Yes. This 10-piece kit is specifically designed for the Kia 10. All bulbs use the correct socket types (T10 wedge and festoon) that match every interior position. No modifications or adapters needed.

What Bulbs Are Included in This 10-Piece Kit?

This kit covers all interior light positions: dome lights, map/reading lights, door courtesy lights, footwell lights, trunk/cargo light, and where applicable, glove box and vanity mirror lights.

Does the Kia 10 Need CANbus LED Bulbs?

The Kia 10 uses a CANbus electrical system. Our kit includes built-in load resistors to prevent dashboard warning lights and ensure flicker-free operation.

How Do LEDs Compare With the Stock Bulbs in a 10?

Feature Stock Bulb AutoKitShop LED
Brightness ~40-50 lumens ~200 lumens
Color 3000K (yellow) 6000K (pure white)
Power ~5W each ~1.5W each
Lifespan ~1,000 hours 30,000+ hours
Heat 50-70°C ~30°C

How Do You Install LED Interior Lights in a 10?

  1. Pry the dome light lens off gently with a plastic trim tool
  2. Remove the old bulb and insert the new LED
  3. Repeat for map lights, door lights, footwells, and trunk
  4. If an LED doesn't light, flip it 180 degrees (polarity-sensitive)

What Is Included in the 10 LED Kit?

Buy the 10-Piece LED Kit for Kia 10 →

Browse all LED kits at AutoKitShop →

Where Can You Buy 10 Interior LED Lights?

Browse the full Kia interior LED lights collection for 30 model-specific kits, or start with one of these:

0 comments

Leave a comment

Please note, comments need to be approved before they are published.