Kia 11 LED Interior Light Upgrade – 11-Piece Kit

Kia 11 LED kit 1 Kia 11 LED kit 2

What Is a 11 Interior LED Light Kit?

A 11 interior LED light kit is a set of direct-replacement bulbs that swap into the factory dome, map, reading, vanity, trunk, glove-box and footwell sockets without cutting or rewiring. (chassis codes H11) AutoKitShop lists 62 11 LED kits covering model years 1994 to 2026. Kits for this model run from 10-piece to 11-piece sets. Each bulb is rated at 300 lumens and roughly 3x the brightness of the original incandescent lamp, at a fraction of the current draw, with a 50,000-hour service life. Kits are supplied as complete sets with the correct socket adapters, so nothing needs to be ordered separately. If a bulb does not light on first fit, rotate it 180 degrees, because LEDs are polarity sensitive. Colour options are white (6000K), ice blue, warm white (3000K) and purple.

What Is Included in the 11 LED Kit?

Upgrade your Kia 11 with this 11-piece LED kit. Replace every dim factory bulb with bright 6000K LEDs for a modern, premium cabin experience. Installation takes 15 minutes with no special tools.

What LED Bulbs Fit the Kia 11?

This 11-piece kit contains bulbs that match every interior socket type in your Kia 11: T10 wedge for map lights, door lights, footwells, and license plate lights; festoon bulbs for dome lights. Each bulb is polarity-protected and pre-tested before shipping. Simply remove the old bulb and push in the LED — no adapters, wiring, or modifications needed.

How Many Interior Bulbs Does the Kia 11 Have?

Your Kia 11 uses 11 bulbs for a complete interior LED upgrade. This includes overhead dome lights, reading/map lights, door courtesy lights, footwell illumination, trunk/cargo area, and where equipped, vanity mirror and glove box lights. The kit provides exact replacements for every position with a few spares.

Does the Kia 11 Need CANbus LEDs?

The Kia 11 uses a CANbus system. Our LEDs include built-in load resistors for error-free operation.

Stock vs LED: What Changes in the Kia 11?

Feature Stock Bulb AutoKitShop LED
Brightness ~40-50 lumens ~200 lumens (4-5x brighter)
Color 3000K yellow 6000K pure white
Power ~5W each ~1.5W each (70% less)
Lifespan ~1,000 hours 30,000+ hours (30x longer)
Heat 50-70°C ~30°C (safe for plastic trim)

How Do You Install LED Interior Lights in a 11?

  1. Pry the dome light lens off gently with a plastic trim tool
  2. Remove the old incandescent bulb
  3. Insert the new LED bulb into the socket
  4. If it doesn't light, flip it 180° (LEDs are polarity-sensitive)
  5. Repeat for all positions — about 15-20 minutes total

What Is Included in the 11 LED Kit?

Shop the 11-Piece LED Kit for Kia 11 at AutoKitShop →

Browse all LED interior light kits →

Where Can You Buy 11 Interior LED Lights?

Browse the full Kia interior LED lights collection for 62 model-specific kits, or start with one of these:

0 comments

Leave a comment

Please note, comments need to be approved before they are published.