Is the 13-piece LED kit compatible with the Mazda 6 Mazda6 MK2 GH?

Yes, this 13-piece LED interior light kit uses T10 wedge and festoon sockets that match every interior position in the Mazda 6 Mazda6 MK2 GH. Direct plug-and-play replacement — no cutting, no wiring, no adapters needed.

Does the Mazda 6 Mazda6 MK2 GH need CANbus LED bulbs?

Yes, the Mazda 6 Mazda6 MK2 GH uses CANbus monitoring and needs LEDs with built-in load resistors to prevent dashboard warning lights.

Mazda 6 Mazda6 MK2 GH LED Interior Light Upgrade – 13-Piece Kit

Q: How many interior bulbs does the Mazda 6 Mazda6 MK2 GH need?

The Mazda 6 Mazda6 MK2 GH uses 13 bulbs for a complete interior LED upgrade: overhead dome lights, map/reading lights, door courtesy lights, footwell illumination, trunk/cargo area, and where equipped, vanity mirror and glove box lights. This kit includes exact replacements for every position.

Mazda 6 Mazda6 MK2 GH LED interior kit 1

Mazda 6 Mazda6 MK2 GH LED interior kit 2

Mazda 6 Mazda6 MK2 GH LED interior kit 3

What Is a 6 6 MK2 GH Interior LED Light Kit?

A 6 6 MK2 GH interior LED light kit is a set of direct-replacement bulbs that swap into the factory dome, map, reading, vanity, trunk, glove-box and footwell sockets without cutting or rewiring. AutoKitShop lists 8 6 6 MK2 GH LED kits covering model years 1990 to 2019. Kits for this model run from 13-piece to 13-piece sets. Each bulb is rated at 300 lumens and roughly 3x the brightness of the original incandescent lamp, at a fraction of the current draw, with a 50,000-hour service life. Kits are supplied as complete sets with the correct socket adapters, so nothing needs to be ordered separately. If a bulb does not light on first fit, rotate it 180 degrees, because LEDs are polarity sensitive. Colour options are white (6000K), ice blue, warm white (3000K) and purple.

What Is Included in the 6 6 MK2 GH LED Kit?

Upgrade your Mazda 6 Mazda6 MK2 GH with our 13-piece LED interior light kit. Replace every dim factory incandescent bulb with bright 6000K pure white LEDs for a modern, premium cabin experience. Installation takes just 15 minutes with no special tools required.

What LED Bulbs Fit the Mazda 6 Mazda6 MK2 GH?

This 13-piece kit contains bulbs that match every interior socket type in your Mazda 6 Mazda6 MK2 GH: T10 wedge bulbs for map lights, door lights, footwells, and license plate lights; festoon bulbs for dome lights. Each bulb is polarity-protected and pre-tested. Simply remove the old bulb and push in the LED — no adapters, wiring, or modifications needed. The ultra-slim design fits behind tight lenses with no clearance issues.

How Many Interior Bulbs Does the Mazda 6 Mazda6 MK2 GH Have?

Your Mazda 6 Mazda6 MK2 GH uses 13 bulbs for a full interior LED upgrade. This includes overhead dome lights, reading/map lights, door courtesy lights, footwell illumination, trunk/cargo area lighting, and where equipped, vanity mirror lights and glove box lights. The kit provides exact replacements for every position with a few spares included.

Does the Mazda 6 Mazda6 MK2 GH Need CANbus LEDs?

The Mazda 6 Mazda6 MK2 GH uses a CANbus system. Our LEDs include built-in load resistors for error-free operation without warning lights or flickering.

Stock vs LED: What Changes?

Feature	Stock Bulb	AutoKitShop LED
Brightness	~40-50 lumens	~200 lumens (4-5x brighter)
Color	3000K yellow	6000K pure white
Power	~5W each	~1.5W each (70% less)
Lifespan	~1,000 hours	30,000+ hours (30x longer)
Heat	50-70°C	~30°C (safe for plastic trim)

How Do You Install LED Interior Lights in a 6 6 MK2 GH?

Use a plastic trim tool to gently pry off the dome light lens
Remove the old incandescent bulb from its socket
Insert the new LED bulb into the socket (fits T10 and festoon positions)
If the LED doesn't light, flip it 180° and reinsert — LEDs are polarity-sensitive
Test before reassembling each light fixture
Repeat for all 13 positions — total time about 15-20 minutes