What LED bulbs fit a Outlander 3 MK3?

A Outlander 3 MK3 uses T10 wedge bulbs (W5W/194/168) for the map, door, footwell and license plate lights, and festoon bulbs for the dome and trunk. AutoKitShop stocks 45 Outlander 3 MK3 kits covering 1989–2025, each supplied with the correct adapters so no separate bulbs are needed.

Does a Outlander 3 MK3 need CANbus error-free LEDs?

Most Outlander 3 MK3 vehicles built after 2005 monitor the interior lighting circuit and will show a bulb-failure warning with a plain LED. A CANbus error-free kit includes the resistor or decoder that mimics the original load, so the warning stays off. Older vehicles with a simple on/off circuit run fine on standard LEDs.

How long does it take to install Outlander 3 MK3 interior LED lights?

Allow 15 to 30 minutes. Switch the light off, pry the lens off with a plastic trim tool, pull the old bulb, push in the LED and test it before refitting the lens. If a bulb does not light, rotate it 180 degrees — LEDs are polarity sensitive. No wiring, coding or tools beyond a trim tool are required.

Will Outlander 3 MK3 interior LEDs cause flickering?

Not with an error-free kit. Flickering on a Outlander 3 MK3 is normally caused by the body control module pulsing the circuit to test for a failed bulb. The built-in load resistor in an error-free kit absorbs that pulse. If you already own a non-CANbus kit, adding a decoder resolves it.

What colour temperature is best for a Outlander 3 MK3?

White (6000K) matches the factory LED signature on late-model Outlander 3 MK3 cars and looks the most OEM. Warm white (3000K) suits older cabins with filament-era trim. Ice blue and purple are aesthetic choices. Colour is selected per bulb, so you can keep the dome white and tint the footwells.

Mitsubishi Outlander 3 MK3 Interior LED Upgrade: ZITWO 11-Piece Kit 2013-2021

June 21, 2026

What Is a Outlander 3 MK3 Interior LED Light Kit?

A Outlander 3 MK3 interior LED light kit is a set of direct-replacement bulbs that swap into the factory dome, map, reading, vanity, trunk, glove-box and footwell sockets without cutting or rewiring. (chassis codes L200, I2006) AutoKitShop lists 45 Outlander 3 MK3 LED kits covering model years 1989 to 2025. Kits for this model run from 2-piece to 14-piece sets. Each bulb is rated at 300 lumens and roughly 3x the brightness of the original incandescent lamp, at a fraction of the current draw, with a 50,000-hour service life. Kits are supplied as complete sets with the correct socket adapters, so nothing needs to be ordered separately. If a bulb does not light on first fit, rotate it 180 degrees, because LEDs are polarity sensitive. Colour options are white (6000K), ice blue, warm white (3000K) and purple.

What Is Included in the Outlander 3 MK3 LED Kit?

The Mitsubishi Outlander 3 (MK3, 2013-2021) is a solid SUV ??practical seven-seat layout, decent off-road capability in GT trim, and reliable drivetrains. But Mitsubishi never prioritized interior details, and the cabin lighting is Exhibit A. Those stock incandescent bulbs throw a weak yellow glow that makes the spacious interior feel dim and dated. Outlander owners on forums have been doing LED swaps for years, calling it the single best aesthetic upgrade you can make for the money.

What Is Included in the Outlander 3 MK3 LED Kit?

The ZITWO 11Pcs LED Bulb Interior Kit for Mitsubishi Outlander 3 MK3 III 2013-2021 covers every interior position. Here's what's included:

Front Dome & Map Light ??2 pcs
Rear Dome & Map Light ??2 pcs
Vanity Mirror Light ??2 pcs
Trunk Light ??1 pc
License Plate Light ??2 pcs
Extra Light ??2 pcs (spares)
Free Installation Tools ??1 pc

All bulbs use the T10 (W5W/194) interface. Each delivers 300 lumens at 8 watts ??roughly 300% brighter than factory. The 31mm package is a direct fit for all Outlander MK3 sockets.

How Do You Install LED Interior Lights in a Outlander 3 MK3?

The Outlander's cabin is large, so good lighting matters. The front dome/map lights finally throw enough light to actually see what you're doing. The rear dome lights ??especially important if you regularly carry passengers in the second or third row ??become genuinely useful. The cargo area light transforms the trunk from a guessing game into a well-lit space. And the license plate lights modernize the rear appearance significantly. Outlander owners on forums consistently say this is the first mod they recommend to new owners.

How Do You Install LED Interior Lights in a Outlander 3 MK3?

Mitsubishi kept the interior simple. Use the included trim tool to pop off light covers, remove the old bulb, install the LED, and test. If it doesn't light, flip it 180 degrees. For the dome light festoon bulbs, gently squeeze the metal contacts for a tighter fit. The whole job takes 15-20 minutes.

Will LED Bulbs Trigger a Warning Light on a Outlander 3 MK3?

Mitsubishi's CANbus system is moderately sensitive. The ZITWO kit includes built-in error cancellation, ensuring zero flicker, no dashboard warnings, and no hyper-flash. 100% error-free operation across all positions ??no bulb-out messages, no strobe effects.

Which Colour Temperature Should You Choose?

Available in White, Ice Blue, Warm White, or Purple. White gives the cleanest modern upgrade, making the Outlander's interior feel significantly newer. All bulbs carry a 2-year warranty with 50,000+ hour lifespan.

What Should You Know About OEM vs LED Comparison?

Feature	OEM Incandescent	ZITWO LED Kit
Brightness	~80 lumens	300 lumens per bulb
Power Draw	~10W per bulb	8W per bulb
Lifespan	1,000-2,000 hours	50,000+ hours
Color Options	Warm yellow	Choice of 4 colors
CANbus Safe	N/A (OEM)	100% error-free
Installation	Replace when dead	Plug and play, 15-20 min
Warranty	OEM 1-year	2 years

What Should You Know About Upgrade Your Outlander's Cabin?

Don't let dim bulbs drag down your Outlander experience. Grab the ZITWO 11Pcs LED Kit for Mitsubishi Outlander 3 at AutoKitShop and see your SUV in a whole new light.

Browse LED interior light kits at AutoKitShop