Peugeot 407 SW 2004-2008 LED Interior Light Upgrade – 10-Piece Kit

Upgrading the interior lighting in your Peugeot 407 SW (2004-2008) is one of the simplest and most satisfying modifications you can make. The stock incandescent bulbs produce a dim yellow glow that makes the cabin feel dated — especially at night. An LED swap transforms the space with crisp, bright light that matches modern vehicles.

This 10-piece LED kit is specifically designed for the Peugeot 407 SW. It covers every interior bulb position including the dome light, map lights, door courtesy lights, footwells, trunk, and more. Each bulb is plug-and-play — no wiring, no cutting, no permanent modifications required.

What Is a 407 SW 2004-2008 Interior LED Light Kit?

A 407 SW 2004-2008 interior LED light kit is a set of direct-replacement bulbs that swap into the factory dome, map, reading, vanity, trunk, glove-box and footwell sockets without cutting or rewiring. AutoKitShop lists 26 407 SW 2004-2008 LED kits covering model years 2004 to 2014. Kits for this model run from 2-piece to 19-piece sets. Each bulb is rated at 300 lumens and roughly 3x the brightness of the original incandescent lamp, at a fraction of the current draw, with a 50,000-hour service life. Kits are supplied as complete sets with the correct socket adapters, so nothing needs to be ordered separately. If a bulb does not light on first fit, rotate it 180 degrees, because LEDs are polarity sensitive. Colour options are white (6000K), ice blue, warm white (3000K) and purple.

What LEDs Are Compatible With the Peugeot 407 SW?

The Peugeot 407 SW uses standard socket types (T10/W5W wedge for smaller positions, festoon for dome lights). This kit includes bulbs that match every socket in your vehicle. Simply remove the old bulbs and replace them with the LEDs — the process takes about 15-20 minutes with no special tools.

How Many Bulbs Does the Peugeot 407 SW Need?

This 10-piece kit covers every interior light position. Most compact and midsize vehicles use 10-14 bulbs. The exact count depends on your trim level (some models have additional footwell or vanity mirror lights). This kit provides enough bulbs for a complete upgrade with a few spares.

Does the Peugeot 407 SW Need CANbus LEDs?

The Peugeot 407 SW (2004-2008) uses a CANbus system that monitors current draw. Without built-in load resistors, generic LEDs can trigger dashboard warnings or flickering. These bulbs include CANbus compensation so everything stays error-free.

How Do LEDs Compare With the Stock Bulbs in a 407 SW 2004-2008?

How Do You Install LED Interior Lights in a 407 SW 2004-2008?

Installing LED bulbs in the Peugeot 407 SW is straightforward:

1. Overhead console: Gently pry the lens off with a plastic trim tool. Swap the festoon or T10 bulbs.
2. Door lights: The lens twists out with a 30-degree turn. Pull the old wedge bulb and push in the LED.
3. Footwell lights: These pull straight out from the socket. Match the orientation of the original bulb.
4. Trunk light: Pry the housing out from the trim panel. Disconnect the plug, swap bulbs, and reconnect.

If an LED doesn't light, flip it 180 degrees — LEDs are polarity-sensitive and this is the most common 'issue'.

Why Upgrade the Peugeot 407 SW to LED?

LED interior lights provide dramatically better visibility at night. Finding dropped items, reading maps, and loading the trunk all become easier. The 6000K pure white light matches modern luxury vehicles and makes the cabin feel newer. LEDs also draw 70% less power than stock bulbs, reducing strain on your battery.

What Should You Know About Related Products for Peugeot 407 SW?

10-Piece LED Interior Light Kit for Peugeot 407 SW | 10-Piece LED Interior Light Kit for Peugeot 407 SW | 15-Piece LED Interior Light Kit for Peugeot 407 SW

Browse all LED interior light kits at AutoKitShop →