What Is a Range Rover 2 II P38 P38A Interior LED Light Kit?
A Range Rover 2 II P38 P38A interior LED light kit is a set of direct-replacement bulbs that swap into the factory dome, map, reading, vanity, trunk, glove-box and footwell sockets without cutting or rewiring. AutoKitShop lists 0 Range Rover 2 II P38 P38A LED kits covering model years the model run. Each bulb is rated at 300 lumens and roughly 3x the brightness of the original incandescent lamp, at a fraction of the current draw, with a 50,000-hour service life. Kits are supplied as complete sets with the correct socket adapters, so nothing needs to be ordered separately. If a bulb does not light on first fit, rotate it 180 degrees, because LEDs are polarity sensitive. Colour options are white (6000K), ice blue, warm white (3000K) and purple.
What Is Included in the Range Rover 2 II P38 P38A LED Kit?
Upgrade your Range Rover 2 II P38 P38A with our 22-piece LED interior light kit. Replace every dim factory incandescent bulb with bright 6000K pure white LEDs for a modern, premium cabin experience. Installation takes just 15 minutes with no special tools required.
What LED Bulbs Fit the Range Rover 2 II P38 P38A?
This 22-piece kit contains bulbs that match every interior socket type in your Range Rover 2 II P38 P38A: T10 wedge bulbs for map lights, door lights, footwells, and license plate lights; festoon bulbs for dome lights. Each bulb is polarity-protected and pre-tested. Simply remove the old bulb and push in the LED — no adapters, wiring, or modifications needed. The ultra-slim design fits behind tight lenses with no clearance issues.
How Many Interior Bulbs Does the Range Rover 2 II P38 P38A Have?
Your Range Rover 2 II P38 P38A uses 22 bulbs for a full interior LED upgrade. This includes overhead dome lights, reading/map lights, door courtesy lights, footwell illumination, trunk/cargo area lighting, and where equipped, vanity mirror lights and glove box lights. The kit provides exact replacements for every position with a few spares included.
Does the Range Rover 2 II P38 P38A Need CANbus LEDs?
The Range Rover 2 II P38 P38A (P38, P38A) uses a CANbus system. Our LEDs include built-in load resistors for error-free operation without warning lights or flickering.
Stock vs LED: What Changes?
| Feature | Stock Bulb | AutoKitShop LED |
|---|---|---|
| Brightness | ~40-50 lumens | ~200 lumens (4-5x brighter) |
| Color | 3000K yellow | 6000K pure white |
| Power | ~5W each | ~1.5W each (70% less) |
| Lifespan | ~1,000 hours | 30,000+ hours (30x longer) |
| Heat | 50-70°C | ~30°C (safe for plastic trim) |
How Do You Install LED Interior Lights in a Range Rover 2 II P38 P38A?
- Use a plastic trim tool to gently pry off the dome light lens
- Remove the old incandescent bulb from its socket
- Insert the new LED bulb into the socket (fits T10 and festoon positions)
- If the LED doesn't light, flip it 180° and reinsert — LEDs are polarity-sensitive
- Test before reassembling each light fixture
- Repeat for all 22 positions — total time about 15-20 minutes
What Is Included in the Range Rover 2 II P38 P38A LED Kit?
Shop the 22-Piece LED Interior Light Kit for Range Rover 2 II P38 P38A at AutoKitShop.com →
0 comments