What Is a Outback Legacy Impreza Interior LED Light Kit?
A Outback Legacy Impreza interior LED light kit is a set of direct-replacement bulbs that swap into the factory dome, map, reading, vanity, trunk, glove-box and footwell sockets without cutting or rewiring. (chassis codes W16W, T15) AutoKitShop lists 22 Outback Legacy Impreza LED kits covering model years 1999 to 2021. Kits for this model run from 2-piece to 11-piece sets. Each bulb is rated at 300 lumens and roughly 3x the brightness of the original incandescent lamp, at a fraction of the current draw, with a 50,000-hour service life. Kits are supplied as complete sets with the correct socket adapters, so nothing needs to be ordered separately. If a bulb does not light on first fit, rotate it 180 degrees, because LEDs are polarity sensitive. Colour options are white (6000K), ice blue, warm white (3000K) and purple.
What Is Included in the Outback Legacy Impreza LED Kit?
Upgrade your Subaru Outback Legacy Impreza with our 2-piece LED interior light kit. Replace every dim factory incandescent bulb with bright 6000K pure white LEDs for a modern, premium cabin experience. Installation takes just 15 minutes with no special tools required.
What LED Bulbs Fit the Subaru Outback Legacy Impreza?
This 2-piece kit contains bulbs that match every interior socket type in your Subaru Outback Legacy Impreza: T10 wedge bulbs for map lights, door lights, footwells, and license plate lights; festoon bulbs for dome lights. Each bulb is polarity-protected and pre-tested. Simply remove the old bulb and push in the LED — no adapters, wiring, or modifications needed. The ultra-slim design fits behind tight lenses with no clearance issues.
How Many Interior Bulbs Does the Subaru Outback Legacy Impreza Have?
Your Subaru Outback Legacy Impreza uses 2 bulbs for a full interior LED upgrade. This includes overhead dome lights, reading/map lights, door courtesy lights, footwell illumination, trunk/cargo area lighting, and where equipped, vanity mirror lights and glove box lights. The kit provides exact replacements for every position with a few spares included.
Does the Subaru Outback Legacy Impreza Need CANbus LEDs?
The Subaru Outback Legacy Impreza does not require CANbus-specific LEDs for interior lights, but our kit is fully compatible and flicker-free.
Stock vs LED: What Changes?
| Feature | Stock Bulb | AutoKitShop LED |
|---|---|---|
| Brightness | ~40-50 lumens | ~200 lumens (4-5x brighter) |
| Color | 3000K yellow | 6000K pure white |
| Power | ~5W each | ~1.5W each (70% less) |
| Lifespan | ~1,000 hours | 30,000+ hours (30x longer) |
| Heat | 50-70°C | ~30°C (safe for plastic trim) |
How Do You Install LED Interior Lights in a Outback Legacy Impreza?
- Use a plastic trim tool to gently pry off the dome light lens
- Remove the old incandescent bulb from its socket
- Insert the new LED bulb into the socket (fits T10 and festoon positions)
- If the LED doesn't light, flip it 180° and reinsert — LEDs are polarity-sensitive
- Test before reassembling each light fixture
- Repeat for all 2 positions — total time about 15-20 minutes
What Is Included in the Outback Legacy Impreza LED Kit?
Shop the 2-Piece LED Interior Light Kit for Subaru Outback Legacy Impreza at AutoKitShop.com →
Where Can You Buy Outback Legacy Impreza Interior LED Lights?
Browse the full Subaru interior LED lights collection for 22 model-specific kits, or start with one of these:
0 comments