Toyota Yaris Interior LED Lights – CANbus Error-Free Kits
What Are Toyota Yaris Interior LED Lights?
A Toyota Yaris interior LED light kit is a set of direct-replacement bulbs that fit the factory dome, map, reading, vanity, trunk, glove-box and footwell sockets without cutting or rewiring. Common chassis codes include AV10, E12, E120, E150. AutoKitShop stocks 43 Toyota Yaris interior LED kits covering model years 1999 to 2025. Kits for this model run from 2-piece to 11-piece sets. Each bulb runs at 300 lumens and roughly three times the brightness of the original incandescent lamp while drawing a fraction of the current, with a 50,000-hour rated service life. Every kit ships complete with the correct socket adapters. If a bulb does not light on first fit, rotate it 180 degrees, because LEDs are polarity sensitive.
What LED Bulbs Fit a Toyota Yaris?
The Toyota Yaris interior kit replaces the factory wedge and festoon bulbs behind the dome, map, vanity, door, footwell, glove-box and trunk lenses. Bulb sizes are quoted using the industry codes — T10, W5W, 194, 168 and festoon — so you can match them against the bulbs you remove. Every kit is polarity-protected and pre-tested, and the slim body clears tight factory lenses without fouling the housing.
Which Chassis Codes Does This Cover?
| Chassis code seen in Yaris product titles |
|---|
| AV10 |
| E12 |
| E120 |
| E150 |
| T100 |
| T25 |
Does the Toyota Yaris Need CANbus Error-Free Bulbs?
On Toyota Yaris models built after roughly 2005, yes. The body control module measures the current drawn by the interior circuit, and a plain LED draws too little, so the car assumes the bulb has failed and flags a warning. An error-free kit carries the load resistor or decoder that keeps the circuit inside tolerance.
What Sizes Are Available?
We stock 43 Toyota Yaris interior LED kits, from 2-piece to 11-piece sets, covering 1999–2025. Piece count is stated in each product title.
Frequently Asked Questions
What LED bulbs fit a Toyota Yaris?
Most Toyota Yaris models use T10 wedge bulbs (W5W / 194 / 168) for map, door, footwell and licence-plate lights, and festoon bulbs for the dome and trunk. We stock 43 Toyota Yaris interior LED kits covering 1999–2025, each supplied with the matching adapters.
Does a Toyota Yaris need CANbus error-free bulbs?
Toyota Yaris vehicles that monitor the interior lighting circuit will show a bulb-failure warning with a plain LED. An error-free kit includes a resistor or decoder that mimics the original load so the warning stays off. Older Yaris generations with a simple on/off circuit run fine on standard LEDs.
How many bulbs does a Toyota Yaris interior kit include?
Kits for the Toyota Yaris run from 2-piece to 11-piece sets. A hatchback typically needs 8-10 bulbs, a sedan or SUV 11-14, and a car with footwell and vanity lighting up to 19. The piece count is printed in every product title — count your cabin bulbs and match it.
Can I install Toyota Yaris interior LED lights myself?
Yes. Allow 15 to 30 minutes. Switch the light off, prise the lens off with a plastic trim tool, pull the old bulb, push in the LED and test before refitting. Rotate a bulb 180 degrees if it does not light. No wiring, coding or dealer visit is required.
What colour temperature suits a Toyota Yaris?
White (6000K) matches the factory LED signature on later Yaris models and looks the most OEM. Warm white (3000K) suits older cabins. Ice blue and purple are styling choices. Colour is selected per bulb.
