Ignition Coils For Cassette 02-05 Chevy Trailblazer Canyon Envoy GMC UF303 C1395 5c1392 E2

Specifications

Length(cm): 30.0, width(cm): 25.0, height(cm): 8.0

Weight(kg): 3.18

Material: Plastic

Color: Black

Placement on Vehicle: Front

Voltage: 12V

Terminal Quantity: 3

Connector Gender: Female

Terminal Gender: Male

Terminal Type: Blade

Interchange Part Numbers

‎C1395

12568062

5c1392

E255

52-1743

Gn10114

Ic414

12568062

19300921

8-12568-062-0

Uf-303

1214

UF303 C1395 5c1392 E255 Ic414

Fitment

For 2004-2005 Buick Rainier L6 4.2L
For 2004-2006 Chevrolet Colorado L4 2.8L
For 2004-2006 Chevrolet Colorado L5 3.5L
For 2002-2005 Chevrolet Trailblazer L6 4.2L
For 2002-2005 Chevrolet Trailblazer EXT L6 4.2L
For 2004-2006 GMC Canyon L4 2.8L
For 2004-2006 GMC Canyon L5 3.5L
For 2002-2005 GMC Envoy L6 4.2L
For 2002-2005 GMC Envoy XL L6 4.2L
For 2004-2005 GMC Envoy XUV L6 4.2L
For 2006 Hummer H3 L5 3.5L
For 2003-2005 lsuzu Ascender L6 4.2L
For 2006 Lsuzu l-280 L4 2.8L
For 2007-2008 lsuzu l-280 L4 2.9L
For 2006 Lsuzu L-350 2006 L5 3.5L
For 2007-2008 Lsuzu L-370 L5 3.7L
For 2002-2004 Oldsmobile Bravada L6 4.2L
For 2005 Saab 9-7X L6 4.2L
For 2009 Saab 9-7X L6 4.2L

Features

Built to strict quality control standards 100% factory tested

IATF16949

100% Compatible with OEM Parts, meets Original Equipment Manufacturer (OEM) Standards

Direct replacement

100% pure copper windings in bobbins improve durability ,thermoplastic housing withstands heat stress for enhanced durability

Spark Plugs are using High-Performance Iridium metal, Much better than Nickel and Platinum

It's suggested that ignition coil and spark plug be replaced in a sychronized manner to lower the likelihood of common ignition system dysfunctions such as failure to start，

engine vibration, misfiring, inadequate power ,spark plug fouling and poor fuel economy

Attention

How to Change Ignition Coils and Spark Plugs?
1.Disconnect the old ignition coil and spark plugs
2.Disconnect your battery’s negative terminal
3.Locate the ignition coil and spark plugs to be replaced.
4.Release the clip on the plug running into the side of coil.
5.Use a wrench to unscrew the bolts holding the original coil in place
6.Extract original ignition coil and spark plugs from the engine bay
7.Swapping in the new ignition coil and spark plugs
8.Prior to installation, compare the new coil to the old one
9.Orient the new coil in the same direction
10.Insert the bolts to hold the coil in place
11.Activate the New ignition coil and spark plugs
12.Connect the plug into the side coil
13.Plug in ignition cables according to the order written on them.
14.Reconnect the battery
15.Start the vehicle to test the new ignition coil and spark plugs

Note

In preparation for the replacement, the vehicle should be turned off and cooled for a certain period of time before starting the replacement.
pay attention to the cleanliness of the entire operation, must wipe the ignition coil around the dust and oil, 

if into the combustion chamber, will have serious adverse effects, try to wear gloves to operate.