Ignition Switch Starter 12450251 15242754 FOR Chevrolet Silverado Tahoe 2003-2006 Car Acce

Package Includes:

• 1 piece Ignition Switch Starter

OEM/Cross Reference Part Number:

• 12450251

• 15242754

• 633-00197

• US-331

Compatible Vehicles

The following vehicle applications are based on OE specifications. Verification against the existing part number is recommended.

• fit for FOR Buick Rainier 2004-2007

• fit for FOR Buick Rendezvous 2002-2007

• fit for FOR Cadillac Escalade 2003-2006

• fit for FOR Chevrolet Avalanche 1500 2003-2006

• fit for FOR Chevrolet Avalanche 2500 2003-2006

• fit for FOR Chevrolet Express 1500 2008-2011

• fit for FOR Chevrolet Express 2500 2008-2011

• fit for FOR Chevrolet Express 3500 2008-2011

• fit for FOR Chevrolet Silverado 1500 2003-2006

• fit for FOR Chevrolet Silverado 2500 2003-2007

• fit for FOR Chevrolet Silverado 3500 2003-2006

• fit for FOR Chevrolet Silverado 3500 Classic 2007

• fit for FOR Chevrolet Ssr 2003-2006

• fit for FOR Chevrolet Suburban 1500 2003-2006

• fit for FOR Chevrolet Suburban 2500 2003-2006

• fit for FOR Chevrolet Tahoe 2003-2006

• fit for FOR Chevrolet Trailblazer 2002-2009

• fit for FOR GMC Envoy 2002-2009

• fit for FOR GMC Savana 1500 2003-2007

• fit for FOR GMC Savana 2500 2003-2007

• fit for FOR GMC Savana 3500 2003-2007

• fit for FOR GMC Sierra 1500 2003-2006

• fit for FOR GMC Sierra 1500 Classic 2007

• fit for FOR GMC Sierra 2500 2003-2006

• fit for FOR GMC Sierra 2500 Classic 2007

• fit for FOR GMC Sierra 3500 2003-2007

• fit for FOR GMC Sierra 3500 Classic 2007

• fit for FOR GMC Yukon 2003-2006

• fit for FOR GMC Yukon Xl 1500 2003-2006

• fit for FOR GMC Yukon Xl 2500 2003-2006

• fit for FOR Hummer H1 2003-2006

• fit for FOR Hummer H2 2003-2007

• fit for FOR Oldsmobile Bravada 2002-2004

• fit for FOR Oldsmobile Aztek 2001-2005

Installation Information

1. Deactivate the vehicle's electrical system prior to commencing work.

2. Access the existing ignition switch assembly located in the steering column shroud.

3. Disconnect the electrical connector(s) from the original switch mechanism.

4. Remove the mounting hardware securing the existing switch.

5. Install the replacement unit by aligning the mounting points.

6. Secure the replacement switch with the appropriate mounting hardware.

7. Reconnect the appropriate electrical connector(s) to the new switch.

8. Reinstall the steering column shroud components.

9. Reactivate the vehicle's electrical system and test the switch functionality across all positions.

Important Notes

• - This component serves as a direct replacement for the specified OE numbers.

• - Verify that the electrical connector configuration of this unit matches the component being replaced.

• - Material construction is intended for durability and stable electrical conductivity.